Dummy War Guns: A Complete Guide to 3D-Printed Weapons for Dummy 13
Dummy War Guns explained: the best 3D-printed weapons for Dummy 13, print settings, scaling fixes, cost estimates, and loadout ideas from the community.
What Are Dummy War Guns?
Dummy 13 figures are cheap, poseable, and endlessly customizable — but they ship to the fight completely empty-handed. That gap is exactly what Dummy War Guns fill: a fast-growing library of 3D-printed rifles, SMGs, laser rifles, and heavy weapons scaled to fit a 13 cm articulated figure. If you already own a squad of Dummy 13 troops, Dummy War Guns are the cheapest way to turn a shelf full of plastic skeletons into something that actually looks like an army.
The concept is simple. Makers design a weapon around the grip size and proportions of Dummy 13's hands, upload the STL or 3MF files to a model repository, and anyone with a printer can produce it for pocket change. No paint-matching kits, no scalping on secondary markets — just filament, a slicer, and about an hour of your weekend for a basic sidearm. That accessibility is why Dummy War Guns have quietly become one of the most active corners of the tabletop-printing hobby.
This guide breaks down what's actually worth printing, which settings get clean results at miniature scale, and how to build a loadout that looks intentional instead of random.
The Most Popular Dummy War Guns in the Community Collection
The center of gravity right now is a MakerWorld collection simply titled "dummy war," curated by user poffenrothfamily. It bundles 27 models from a mix of designers, and the download counts tell you pretty clearly which pieces the community trusts. You can browse the full set on MakerWorld's official model library before you commit to a print.
Here's a snapshot of the standout Dummy War Guns and accessories, based on the collection page metrics at the time of writing.
| Model | Designer | Downloads | Likes | Type |
|---|---|---|---|---|
| Dummy 13 Gun Cabinet | 3D_Grandpa | 1.6k | 2.1k | Storage / display |
| Dummy 13 Spec Ops Helmet v2.0 | Foundry K41D | 974 | 738 | Headgear |
| Mando's Weapons | TroisCentTrenteTrois | 900 | 684 | Themed weapon pack |
| Dummy 13 Kriss Vector SMG | Foundry K41D | 798 | 446 | SMG |
| Dummy 13 Mk48 M249 MG4 | MamaJ | 516 | 300 | Light machine gun |
| Dummy 13 sniper laser gun v2 | jiBRILrIAN | 229 | 228 | Sniper / energy weapon |
| dummy 13 assault rifle (working attachments) | Random Axe11 | 203 | 219 | Assault rifle |
A few patterns jump out. Foundry K41D appears repeatedly across weapons and armor, which means you can build a visually consistent operator — helmet, vest, and SMG all sharing the same design language. The Gun Cabinet from 3D_Grandpa is the single most-liked item in the collection, and that makes sense: once you've printed a dozen Dummy War Guns, you need somewhere to put them. And the Kriss Vector SMG outpaces almost everything else on downloads, likely because it's compact, prints in a few pieces, and looks instantly recognizable on a shelf.
Community reports also mention builders experimenting with spring-loaded, single-shot "firing" mechanisms in Dummy Wars-themed YouTube builds. Treat those as showcase projects rather than everyday props — they need tuning, and they're not something you hand to a kid.
Matching Dummy War Guns to a Loadout Role
Not every print needs to be a showpiece. A good squad reads better when each figure has a distinct silhouette.
| Loadout slot | Example model | Why it works | Print difficulty |
|---|---|---|---|
| Primary rifle | dummy 13 assault rifle (working attachments) | Swappable attachments add detail | Medium |
| CQB / SMG | Dummy 13 Kriss Vector SMG | Compact shape, stands out | Easy–Medium |
| Support weapon | Dummy 13 Mk48 M249 MG4 | Big profile, anchors a diorama | Medium |
| Sniper | Dummy 13 sniper laser gun v2 | Long barrel reads well at distance | Easy |
| Themed pack | Mando's Weapons | Several props in one download | Varies |
| Storage | Dummy 13 Gun Cabinet | Keeps the armory organized | Medium |
Print Settings and Materials That Actually Work
Miniature weapons fail for boring reasons: layers that shear off a thin barrel, grip channels that fuse shut, or a muzzle that droops because the part cooled too fast. Dummy War Guns are small enough that your slicer profile matters more than your printer's price tag.
| Setting | Small parts (sights, grips, mags) | Main bodies (receivers, barrels) |
|---|---|---|
| Material | PLA+ or resin | PLA+ or PETG |
| Layer height | 0.08–0.12 mm | 0.16–0.20 mm |
| Wall count | 2–3 | 3–4 |
| Infill | 10–15% | 15–25% |
| Supports | Usually none needed | Only under steep overhangs |
| Orientation | Flat side down on the plate | Barrel horizontal |
| Nozzle | 0.4 mm (0.25 mm for detail) | 0.4 mm |
Practical tips that save filament:
- Print small parts in batches. Ten sights on one plate takes barely longer than one and costs almost nothing extra.
- Dry your filament first. Wet PLA+ strings badly at 0.12 mm layers, and the stringing lands right in the grip channel.
- Slow down on the first layer. A 3 mm-wide magazine base needs a squished first layer or it will pop off mid-print.
- Skip supports when you can. On a 20 mm part, supports usually cost more cleanup time than they save.
- Use PETG if the model gets handled. PLA+ looks sharper, but PETG survives drops and repeated magazine swaps.
Scaling, Assembly, and Grip Fit
Most Dummy War Guns are modeled at 100% for Dummy 13, so your default should be no scaling at all. The problems start when a printer over-extrudes slightly, the grip channel closes up by half a millimeter, and suddenly the weapon won't sit in the hand. Test-fit before you glue anything.
| Problem | Likely cause | Fix |
|---|---|---|
| Grip too tight on the hand | Over-extrusion or elephant's foot | Calibrate flow, scale to 101–102% |
| Magazine won't seat | Layer squish inside the magwell | Ream the channel with a drill bit or needle file |
| Barrel droops or warps | Cooling too aggressive | Lower fan speed, use an enclosure |
| Parts won't align on pegs | Mixed model versions | Check the model notes, then rescale |
| Two halves won't close | Warped base | Re-print flat, add a brim |
For assembly, CA glue (super glue) with a light activator works on PLA+ and PETG alike. Apply it with a toothpick on small joints — a squeeze bottle will flood the detail. If you plan to swap weapons between figures often, consider embedding small magnets in the grip and hand rather than gluing; community builders report this is the single best upgrade for photography and diorama work.
Finishing, Display, and Cost
Raw gray plastic reads as "prototype." A $12 bottle of primer and three acrylic colors will make your Dummy War Guns look like a finished prop. Prime in light coats, block in the base color, hit recesses with a thin black wash, then dry-brush edges with a metallic. Seal with matte varnish so handling doesn't rub the paint off.
For storage, the Dummy 13 Gun Cabinet is the obvious pick — it's the most-liked model in the collection and it doubles as a display piece on a shelf. Magnetically mounted weapons also store well on a thin steel sheet hidden behind a diorama backdrop.
| Build | Filament used | Print time | Rough material cost |
|---|---|---|---|
| Pistol or small prop | 4–8 g | 30–60 min | $0.10–0.25 |
| SMG | 10–18 g | 1.5–3 hr | $0.25–0.55 |
| Assault rifle | 15–30 g | 2–4 hr | $0.40–0.90 |
| Light machine gun | 25–45 g | 3–6 hr | $0.70–1.40 |
| Gun cabinet | 60–120 g | 6–12 hr | $1.80–3.60 |
Costs assume roughly $25 per kilogram of PLA+, and print times are estimates from community reports — a bed-slinger will run longer than a tuned core-XY machine. Even at the high end, a full six-figure armory usually lands under $10 in plastic, which is the entire argument for Dummy War Guns in one number.
One last note: check the license on each model before selling prints. MakerWorld listings vary between personal-use-only and commercial-friendly terms, and "free to download" is not the same as "free to sell."
FAQ
Do Dummy War Guns actually fire? Most are static props designed for posing and display. A small number of community designs include spring-loaded, single-shot mechanisms that launch a plastic projectile a few feet — player experience suggests these are fiddly and best treated as display novelties. Never modify a printed model to accept metal barrels or real ammunition, and check your local laws before building anything that launches a projectile.
What scale should I print Dummy War Guns at? Start at 100%, which is the scale most designers model to for Dummy 13. Only adjust if the grip won't accept the hand — and go in 1–2% increments rather than jumping straight to 110%.
Which filament is best for Dummy War Guns? PLA+ is the sweet spot for detail and cost, and it prints crisp small parts. Switch to PETG if the figure gets handled often, since PLA+ snaps at thin barrels and bayonet tips.
Can I mix weapons and armor from different designers? Yes, and it's the fastest way to build a unique squad. The main caveat is that grip sizes and peg tolerances vary slightly between creators, so test-fit each new model before you commit to glue.
By DummyWar Wiki TeamUpdated
Related Guides
Dummy War Ballistics Explained: How Ballistic Dummies Test Real Combat Ammo
Dummy war ballistics turns raw ammo specs into real-world data. See how ballistic dummies are built, calibrated, and used to judge combat loads.
Dummy War Drones: Drone Operator Class, Dead Ground Map, and RPG-7 Guide
Dummy War Drones arrive in DummyWar's next update alongside the Dead Ground map and an RPG-7 gunner. Here's how the new drone class changes combat.
Dummy War RPG Weapons Guide: Units, Statues and Winning Loadouts
A practical Dummy War RPG weapons guide covering unit roles, statue abilities, attack-vs-defend timing, and loadouts for late-stage pushes.
Dummy War Weapons: The Complete Guide to 3D-Printed Arsenal for Dummy 13 Figures
Build a battle-ready arsenal for your Dummy 13 figure. Print, scale, and finish custom Dummy War Weapons with tested settings, materials, and tips.